BMW S1000RR HP4 HP Race Brake Bleed Valve Kit - High Performance Motorcycle Brake Bleeder Set for Track & Street Racing - Perfect for BMW S1000RR, HP4 Models - Improves Braking Performance & Air Removal

Product description
-Patented system for brake filling and bleeding.
-Fast, straightforward, reliable and completely leaktight.
-Integrated non-return valve for one-man operation.

Details
-Patented system for brake filling and bleeding: quick, easy, clean and reliable.
-Brake-fluid changes are easy, completely reliable, a simple step-by-step procedure.
-Brake bleeding in a matter of minutes, no helper's assistance required.
-Brake-bleeding system used successfully in motorsport and in aeronautics.
-Total leaktightness preserved throughout the entire procedure of filling and bleeding the brake system.
-The bleed valve consists of 2 parts with non-return function. In the process of filling and bleeding the brake, only the top part of the valve is backed off. There is an O-ring integrated into this part of the valve.
-Air cannot make its way via the thread into the brake system while brake bleeding is in progress (the seal at the thread is preserved).
-100% braking performance by avoidance of air in the brake system.
-Does away with the risk of brake fluid escaping in the brake bleeding procedure and damaging the surface of the brake caliper or painted parts of the motorcycle.
-Integrated non-return valve for one-man operation.
-Dispenses with the fault-prone step of synchronised opening and closing of conventional bleed screws.
-A drop in pressure causes the bleed valve to close automatically and remain closed until the next bleed pressure surge.
-Less wear and tear on the tapped bore in the brake caliper: The repeated opening and closing of conventional bleed screws in the brake-bleeding process puts severe strain on the tapped bore in the aluminium brake caliper.
-The larger longitudinal bore is less prone to the formation of deposits or dirt than the conventional small transverse bore.
-Long service life.
-Easy conversion: The HP Race brake bleeding valve takes the place of the standard bleed screw in the brake cylinder.
-Included: 2 bleed valves for the front brake, 1 bleed valve for the rear brake, installation instructions and instructions for use.
-Homologated for use on public roads.

BMW S1000RR|HP4 HP Race Brake Bleed Valve Set
BMW Original Parts